|
| Brand Name: | Genyu |
| Model Number: | GY12864-91 |
| MOQ: | 100 pieces |
| Price: | Negotiable |
| Payment Terms: | T/T, Paypal, Western Union, MoneyGram, Credit Card |
| Supply Ability: | 150K pcs/ Month |
1.54 Inch OLED Screen Blue Bigger PCB Board 128x64 Pixels SSD1309 I2C Interface
Key Features:
Interface: The SSD1309 supports I2C or SPI communication protocols. This makes it compatible with many microcontrollers like Arduino, Raspberry Pi, ESP32, etc.
Display Technology: The SSD1309 is used to control OLED (Organic Light Emitting Diode) screens, which offer excellent contrast and low power consumption because each pixel is individually lit (no backlight).
Low Power Consumption: OLED screens are known for their low power consumption, especially when displaying dark content, as they only use power for the pixels that are turned on (no need for a backlight).
High Contrast & Wide Viewing Angles: OLED displays have great contrast ratios, providing deep blacks and vibrant colors (if applicable), as well as wide viewing angles.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-91 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Display Color | Blue |
| 5 | Panel Size | 1.54 Inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size |
47.0(W) x 43.0(H) x 13.8(D) mm
|
|
8 |
View Area |
37.06(W) x19.52(H) mm |
| 9 | Active Area |
35.06(W) x17.52(H) mm
|
| 10 | Dot Size | 0.254(W) x 0.254(H) mm |
| 11 | Dot Pitch | 0.274(W) x 0.274(H) mm |
| 12 | Drive IC | SSD1309 |
| 13 | Interface | I2C |
| 14 | Operating Temperature | -40~+70℃ |
| 15 | Voltage | 3~5V |
| 16 | PIN Pitch | 2.54 mm |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
How to Interface a 1.54-inch PMOLED Display with a Microcontroller (e.g., Arduino):
Wiring for I2C:
VCC to 3.3V or 5V (check display voltage requirements)
GND to GND
SCL to SCL (A5 on Arduino Uno)
SDA to SDA (A4 on Arduino Uno)
Wiring for SPI:
VCC to 3.3V or 5V
GND to GND
SCK (Serial Clock) to digital pin 13 on Arduino
MOSI (Master Out Slave In) to digital pin 11 on Arduino
CS (Chip Select) to a digital pin (e.g., 10)
DC (Data/Command) to a digital pin (e.g., 9)
RES (Reset) to a digital pin (e.g., 8)
Libraries: You can use libraries like Adafruit SSD1306 (for OLED displays) or U8g2 (for various small monochrome OLED displays). These libraries support various functions like drawing shapes, text, and images.
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
