|
| Brand Name: | Genyu |
| Model Number: | GY12864-18 |
| MOQ: | 100 pieces |
| Price: | Negotiable |
| Payment Terms: | T/T, Paypal, Western Union, MoneyGram, Credit Card |
| Supply Ability: | 150K pcs/ Month |
1.3 Inch OLED Display White Color 128x64 Dots SH1106 30PIN Soldering FPC
Key Features:
Display Size: 1.3 inches diagonally.
Resolution: Typically 128x64 pixels (monochrome), but higher resolutions (e.g., 128x128 or 256x128) are possible, especially for color versions.
Color: Monochrome (black and white) is most common, but there are color variants (usually RGB, sometimes with a higher resolution).
Technology: OLED (Organic Light Emitting Diode), which provides high contrast, low power consumption, and wide viewing angles.
Brightness: OLEDs generally have higher brightness and contrast compared to LCDs, and the black levels are true black since the individual pixels emit light directly.
Interfaces: Typically available in I2C and SPI interfaces, with I2C being more common for easy wiring.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-18 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | White |
| 5 | Size | 1.3 inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size |
34.5(W)x23.0(H)x1.427(D) mm
|
| 8 | View Area |
31.42 (W) x 16.7(H) mm
|
| 9 | Active Area |
29.42(W) x14.7(H) mm
|
| 10 | Dot Size | 0.21(W)*0.21(H) mm |
| 11 | Dot Pitch | 0.23(W)*0.23(H) mm |
| 12 | Drive IC | SH1106G |
| 13 | Interface |
6800/8080 interface, 4 wire serial interface, I2C
|
| 14 | FPC Connector | 30PIN, soldering |
| 15 | Voltage | VDD=1.65~3.3V, Vin=3.5~4.2V |
| 16 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
Common OLED Controller ICs for 1.3-inch Displays:
SSD1306: One of the most common controllers used in 1.3-inch OLED displays with 128x64 resolution. It supports both I2C and SPI.
SSD1327: Another popular controller used in similar displays, especially for higher resolution or color OLEDs.
SH1106/SH1107: Found in some displays with the same or similar form factor and resolution.
Pinout for 1.3-inch OLED Display (I2C version):
If you're using an I2C version of the 1.3-inch OLED display (with a controller like SSD1306 or SSD1327), the typical pinout will be:
VCC: Power supply (usually 3.3V or 5V).
GND: Ground.
SCL: Serial Clock Line (I2C).
SDA: Serial Data Line (I2C).
RES (Reset): Reset pin (optional for I2C).
DC (Data/Command): Data/Command pin (used for SPI, usually tied to ground for I2C).
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
